PDA

View Full Version : Error: Manifest.barcode.SetStringRepresentation failed: String too long



Greenfish
05-13-2004, 02:49 PM
Error: Manifest.barcode.SetStringRepresentation failed: String too long


Full Error:
Unable to process "End of day" request.
Manifest.barcode.SetStringRepresentation failed: String too long


Steps for Resolution:

1) Check your ShipRush Version (Help | About ShipRush). If it is
lower than 3.0.0.281:

-Download 3.0.0.281 (use the download link from when you first
downloaded ShipRush)

-Run the downloaded file. Select 'Update ShipRush'

-Repeat on all the PC's where ShipRush has been installed, including
the ShipRush Server PC.

2) Contact Z-Firm Technical Support


*** Following is for use by Z-Firm Technical Support Only ***


1) Check that the ShipRush Server is build 281 or higher

2) Install an updated DBManager utility (283 or higher)

3) Run the new DBManager

4) Select the Heal option at the bottom

5) Select all records for Healing

6) Start ShipRush, perform End of Day

7) Any End of Day paperwork that needs to be reprinted (from prior days)
can now be accessed in the End of Day Paperwork tab.





Tool download: http://ftp.zfirm.com/download_new/hotfix/SR3-283-HOT-for-281.exe


------------------------
ShipRush Pro v3
February 2004

Manifest
barcode
SetStringRepresentation

SYSOPR
05-13-2004, 03:15 PM
One of the steps there is to contact Z-Firm tech support. Please give us a call Friday!

Thank you!

SYSOPS
05-13-2004, 03:24 PM
Afternoon Greenfish,
If you are getting the error about string too long, the kbase article is the solution.

The steps, if you wish to attack this directly:

1) Check that the ShipRush Server is build 281 or higher
2) Install an updated DBManager utility (283 or higher)
3) Run the new DBManager
4) Select the Heal option at the bottom
5) Select all records for Healing
6) Start ShipRush, perform End of Day
7) Any End of Day paperwork that needs to be reprinted (from prior days)
can now be accessed in the End of Day Paperwork tab.

Tool download: http://ftp.zfirm.com/download_new/h...HOT-for-281.exe

Download the tool from the link above
Drop into a temp folder and double click to inflate the files
Browse out to program files\z-firm llc\shiprush v3
Rename the current ShipRushDBManager.exe to ShipRushDBManager.old
Take the DBManager from the inflated folder above
Copy\Paste into z-firm llc\shiprush v3
Follow step 3 above

HTH,
SYSOPS