Untitled Document
Results 1 to 8 of 8

Thread: Change from single PC to Multiuser

  1. #1
    How do I change from Single PC to Multi-User? I can't find the information in the documentation or forum.

  2. #2

    Join Date
    Apr 2004
    Posts
    16,499
    SYSOPS is offline
    Have Questions? Ask the ShipRush Knowledge Base: https://shiprush.com/kbase
    Reply With Quote

  3. #3
    Well, not really.
    I'm at conflict with "Method 1 (via service - preferred method!)" which i want to use.
    But then there is this "Networking a new environment (no ShipRush installed)"
    Which is false because I already have SR running on a standalone PC.

  4. #4

    Join Date
    Apr 2004
    Posts
    16,499
    SYSOPS is offline
    Since you have ShipRush installed already, check to see if the service is present. For some carriers, it is installed even for a stand alone installation. If the service isn't there, you can manually add it

    http://www.zfirm.com/Product_Documen...sh_Service.htm

    Note that a port needs to open if a firewall is present. Now that the service is installed and running, you can install ShipRush on a second machine, and point to this machine as the "server" instance.

    HTH,
    SYSOPS
    Have Questions? Ask the ShipRush Knowledge Base: https://shiprush.com/kbase
    Reply With Quote

  5. #5
    Success.
    While I had access to these same instructions, the terminology does not match that of SR V12 and while I tried several different settings I was not doing something correctly (obviously).
    Referencing this document:
    http://www.zfirm.com/Product_Documen...h_v12-1_FedEx/

    The difference in the section of the DOC vs. SR are here.

    DOC: Workstation, 1.After ShipRush is installed, go to the Settings | Shipping Settings | Advanced | Connection Settings and select to connect via PC name. Select the name of the PC the ShipRush service and database is installed on.

    SR V12: 1.After ShipRush is installed, go to the Settings | Shipping Settings | Advanced | Connection Settings and select to connect via ShipRush Server At: xxx.xxx.xxx.xxx. Enter the IP address of the of the PC the ShipRush service and database is installed on.

  6. #6

    Join Date
    Apr 2004
    Posts
    16,499
    SYSOPS is offline
    Good to hear and thank you for the follow up.

    Normally you can simply use the name of the PC that the service is running on.

    SYSOPS
    Have Questions? Ask the ShipRush Knowledge Base: https://shiprush.com/kbase
    Reply With Quote

  7. #7
    Is there a limit on how many users you can add this way?

  8. #8

    Join Date
    Apr 2004
    Posts
    16,499
    SYSOPS is offline
    The only limit is the license being used with ShipRush.

    HTH,
    SYSOPS
    Have Questions? Ask the ShipRush Knowledge Base: https://shiprush.com/kbase
    Reply With Quote

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •